Image

SCROLL

MIX RM machine

Series

MIX RM

Single shaft
double helix contra flow mixer

Capacity range

300-4500

Liters

/

Batch Range

225-3375

Liters

The RM series is a specific type of mixers with a single shaft construction.

Wide range of products, individual configuration and a wide range of accessories, you can choose a machine that is perfectly suited for your technological requirements and the reliable operation which you will be enjoying for decades.

Unloading

Unloading is carried out by a pneumatic butterfly valve located in the central point of the mixing bowl, which allows for quick time of valve opening and closing.

Control

The RM series mixers are equipped as standard with a colour and reliable HMI touch screen, which is user-friendly and intuitive to use. The soft ware allows access control, manual and automatic operation and up to 100 mixing programs, where each can consist of 5 programmable steps.

Vacuum system

The RM series vacuum mixers can be optionally equipped with a vacuum system. The vacuum mixing process improves absorption of liquids, distribution and absorption of spices and other additives, enables density control, and eliminates air bubbles.

Options

img02

Column
loaders

All models of mixers can be equipped with one or two column loaders for standard DIN9797 euro bins or one loader for dolav container. Screw and belt conveyers are available on individual request.
img02

Temperature
measurement

The sensor built in the mixing bowl allows to have the temperature of the mixed product under constant control and gives the possibility to interrupt the process if the set parameter is exceeded. Easy reading and archiving on the control panel is an additional advantage.

*Option only available with PLC and HMI
img02

Dosage
of water

The system of automatic dosing of any chosen amount of water or other liquids with similar physical parameters to the kneading-trough at any time in the manual process mode or in a predefined stage of the process in the automatic mode.

*Option only available with PLC and HMI
img02

Weighing
system

The use of load cells mounted underneath the trough allows for accurate and precise weighing of products whilst in production, added and removed quantities and gives the ability to automatically start and stop the loading and unloading processes.

*Option only available with PLC and HMI
img02

Polished
batch and shafts

Surface of mixing bowl and mixing shafts with ground surface, which reduces the sticking effect of the product.
img02

Double
jacket

The double heating/cooling jacket for water or other media serves to better control the process by maintaining the required product temperature.
img02

Additional
openwork
cover

Stationary mixers with full and tight top cover can be optionally equipped with an additional openwork cover, which allows us to work safely with the open main cover, which gives us the possibility of direct control or addition of spices, without interrupting the mixing process.

Double-ribbon shaft

These units are equipped with a characteristic two-ribbon shaft with smaller and larger diameters and a counter-rotating direction of rotation, which allows extremely fast mixing time.

  • MIX RM - Ribbon mixers

  • Ribbon mixers

    MIX RM

    Technical data

    Capacity [l]300
    Maximum load [l]225
    Installed power [kW]5,5
    Rotation speed of the shafts [rpm/min]4-36
    Standard controlsPLC with HMI
    Net weight of the machine [kg]640
    Current protection25
    Loading optionsPW 2/250
    Unload200L
    Opening/Closing coversPneumatic
    Capacity [l]600
    Maximum load [l]450
    Installed power [kW]7,5
    Rotation speed of the shafts [rpm/min]3-28
    Standard controlsPLC with HMI
    Net weight of the machine [kg]940
    Current protection32
    Loading optionsPW 2/250
    Unload200L
    Opening/Closing coversPneumatic
    Capacity [l]1000
    Maximum load [l]750
    Installed power [kW]11
    Rotation speed of the shafts [rpm/min]3-22
    Standard controlsPLC with HMI
    Net weight of the machine [kg]1550
    Current protection50
    Loading optionsPW 2/250
    Unload200L
    Opening/Closing coversPneumatic
    Capacity [l]1800
    Maximum load [l]1350
    Installed power [kW]15
    Rotation speed of the shafts [rpm/min]3-18
    Standard controlsPLC with HMI
    Net weight of the machine [kg]1900
    Current protection63
    Loading optionsPW 2/250
    Unload200L
    Opening/Closing coversPneumatic
    Capacity [l]2500
    Maximum load [l]1875
    Installed power [kW]22
    Rotation speed of the shafts [rpm/min]3-15
    Standard controlsPLC with HMI
    Net weight of the machine [kg]2600
    Current protection100
    Loading optionsPW 2/250 or PW2/1000
    Unload1x200L
    Opening/Closing coversPneumatic
    Capacity [l]3500
    Maximum load [l]2625
    Installed power [kW]30
    Rotation speed of the shafts [rpm/min]2-12
    Standard controlsPLC with HMI
    Net weight of the machine [kg]3400
    Current protection120
    Loading optionsPW 2/250 or PW2/1000
    Unload1x200L
    Opening/Closing coversPneumatic
    Capacity [l]4500
    Maximum load [l]3375
    Installed power [kW]37
    Rotation speed of the shafts [rpm/min]1-10
    Standard controlsPLC with HMI
    Net weight of the machine [kg]4200
    Current protection140
    Loading optionsPW 2/250 or PW2/1000
    Unload1x200L
    Opening/Closing coversPneumatic

Application

The N&N’s RM series mixers are designed to mix most loose products such as mixtures of spices, food additives, liquid and semi-liquid products.

Spice mixes

Liquid and semi-liquid products

To download

Catalog

en
Datasheet

en